NORDOCK® FOAMFRAME™ FFI-750 Combination Dock Shelter

Description

The FFI-750 Series of foam side inflatable header Dock Shelter improves safety & productivity, while reducing energy costs.
This shelter provides the ultimate protection for personnel and cargo while loading and off loading trailers.
The inflated head seal pushes tight against the top of the trailer and the vertical curtains push on the sides of the trailer blocking all contaminants.

Includes high-tear abrasion resistant vinyl header bag fabric with double lock stitching.
The unique retraction system quickly deflates & returns unit to stored position.
Each unit consists of two fabric covered foam side pads constructed with 99% compression recovery polyurethane foam core continuously bonded to pressure treated superior backing lumber and fully wrapped with the base fabric.
All mounting hardware is galvanized steel.

FFI-750– WEARTOUGH®–FOAMFRAME™ Dock Shelter Features & Benefits

High-Tear Abrasion Resistant Fabrics with Double Lock Stitched Seams
Unique Retraction System Quickly Deflates & Returns Unit to Stored Position
On/Off Switch with Pilot Light
Galvanized Mounting Hardware
Motor/Blower Mounted in Header
Kiln-Dried Pressure Treated Superior Grade Backing & Head Frame Lumber
99% Memory Foam Core for Extended Life
Side Curtains Inserted with Stays & Foam Bead on Inside Edge to Conform & Retain a Tight Seal Against Trailer Sides
24″ High Yellow Guide Stripes on Bottom of Pads for Accurate Truck Positioning
Bottom Corner Draft Pads Seal Opening
Most Suitable for Door Openings Up to 10’ Feet Wide × 10’ High

FFI-750– WEARTOUGH®–FOAMFRAME™ Dock Shelter Options & Accessories

Standard 16 oz. WEARTOUGH™ Fabric
Automatic On/Off System
Galvanized Steel Frame
Tapered Sides for Incline/Decline Approach
Reinforced Edge on Vertical Panels
Bottom Curtain
Increased Curtain Drops
Higher, Wider & Increased Projection Units
Full Height Yellow Guide Stripes
TERMINATOR™ Trailer Door Gap Seal
Dock Levelers
TRUCK-LOCK® & SMART-HOOK® Vehicle Restraints
FALL-STOP™ Barrier Gate
Loading Dock Lights
IMPACT™ Series Steel Spring & Steel Face Dock Bumpers (10-Year Structural Warranty)
Wheel Chocks
Galvanized Steel Canopies

*SEE CHART IN SHORT FORM SPECS FOR EXCLUSIVE FABRIC OPTIONS

Short Form Specs

WEARTOUGH® Fabric Performance Specifications

Description

The FFI-750 Series of foam side inflatable header dock shelters provide the ultimate protection for personnel and cargo while loading and off loading trailers. The inflated head seal pushes tight against the top of the trailer and the vertical curtains push on the sides of the trailer to help keep out inclement weather, dust and insects creating a more productive and safer environment while saving energy costs and increasing security.

Operation

Once the trailer is positioned against the bumpers for loading, the operator switches the control button to start the blower that in turn inflates the header bag assembly creating a tight seal while allowing clear access into the trailer. The blower runs continuous as long as the loading or off loading is being carried out. When loading is complete, the operator turns off the switch and the header bag automatically retracts away from the trailer.

Construction

The header bag is constructed from flexible and UV resistant High-Tear vinyl fabric; double lock stitched and attached to the pressure treated lumber or optional steel framing. The 1/2 HP 115 volt or optional 230volt motor/blower is integral mounted within the head frame. The on/off switch is mounted to the interior wall and equipped with a power on pilot light. A torsion spring retraction system is mounted within the head frame. Each unit shall consist of (2) two fabric covered foam side pads constructed with 99% compression recovery polyurethane foam core continuously bonded to pressure treated superior backing lumber and fully wrapped with the base fabric. The front side curtains to have sewn in stays to keep a tight seal against the sides of the trailer and yellow guide stripes to aid in positioning. Corner bottom pads seal the bottom side sections. All mounting hardware is galvanized steel.