NORDOCK® SEAL-TITE™ STC Series Dock Seal

Description

The SEAL-TITE™ ST Series Dock Seal is designed to form a tight seal around the trailer with less pressure on building walls resulting in reduced wear and tear on the impact area. The unique design closes the air gap created from swing out trailer doors while allowing clear access into the trailer.

The seal includes high-tear abrasion resistant fabrics with double lock-stitched seams, kiln dried pressure treated superior grade backing & head frame lumber and constructed with 99% memory foam core side frame with condensation drainage system.

SEAL-TITE™ STC Series Dock Seal Features & Benefits

Unique Side Pad Design Captures & Closes Off the Air Gap Created by Swing Out Trailer Doors (Available with a Stationary Head Pad Model STP for Doors Up to 10’ High)
High-Tear Abrasion Resistant Fabrics with Polyester Base & Double Lock Stitched Seams Suitable to Temperatures of – 40 Degrees
Pressure Treated Superior Grade Backing Lumber
99 % Memory Foam Core for Extended Life
Condensation Drainage System
Fixed Head Pad Provides Maximum Seal
Full Height Yellow Guide Stripes for Accurate Truck Positioning
Better Trailer Access with Less Pressure on Building Wall than Conventional Foam Pad Seals
Most Suitable for Door Openings Up to 9’ Wide x 9’ High
Galvanized Mounting Hardware Included

SEAL-TITE™ STC Seal Options & Accessories

Wear Pleats Available in 4″, 6″ and 8″ Overlap Exposure
Adjustable Head Curtain
Fire Retardant Foam & Fabric
Half or Full Foam Filled Curtain
Wide Range of Configurations to Suit Site Conditions
Double Layer Wear Face
Galvanized Steel Canopies
Longer Curtains
Tapered Side Pads to Suit Incline/Decline Approach
TERMINATOR™ Trailer Door Gap Seal
Dock Levelers
TRUCK-LOCK® & SMART-HOOK® Vehicle Restraints
FALL-STOP™ Barrier Gate
Loading Dock Lights
IMPACT™ Series Steel Spring & Steel Face Dock Bumpers (10-Year Structural Warranty)
Wheel Chocks
Galvanized Steel Canopies

*SEE CHART IN SHORT FORM SPECS FOR EXCLUSIVE FABRIC OPTIONS

Short Form Specs

WEARTOUGH® Fabric Performance Specifications

Description

The WEARTOUGH® Series STC dock seal is designed to form a tight seal against the trailer doors to provide effective protection for personnel and cargo while loading and off-loading trailers. The truck backs into the side pads and head pad to keep out inclement weather, dust and insects creating a more productive and safer environment while saving energy costs and increasing security. The unique design closes the gap created from swing out trailer doors, lessens the pressure on building walls and allows a clearer access into the trailer.

Specification

Dock seal(s) to be Model STP as manufactured by NORDOCK® to suit door size of ________ wide x ________ high and dock height of ________ with a projection of ________ to suit _________ of dock bumper projection. Each unit shall consist of two fabric covered foam side pads and one head pad. Side pads to be constructed with 99% compression recovery polyurethane foam core continuously bonded to pressure treated superior backing lumber and fully wrapped with the base fabric. The base fabric shall be _______________. The side vertical side pads to be shaped to accommodate trailer widths of 8 feet to 8’ 6” in width with a second layer of high-visibility orange on outside face and a full height yellow guide stripe on inside to aid in driver positioning. Taper side pads if needed to suit an approach grade percentage of _______________. Head pad height shall be __________ to provide a minimum 6” overlap with the lowest trailer/truck to be serviced. The head pad shall be equal to the overall unit width.

Warranty

NORDOCK® guarantees that the STC Model of dock seals will perform as described and to the full satisfaction of the purchaser for one-year from date of receipt. Consult your NORDOCK® representative for assistance in choosing the correct size and options for your application.